Header logo is


2018


Softness, Warmth, and Responsiveness Improve Robot Hugs
Softness, Warmth, and Responsiveness Improve Robot Hugs

Block, A. E., Kuchenbecker, K. J.

International Journal of Social Robotics, 11(1):49-64, October 2018 (article)

Abstract
Hugs are one of the first forms of contact and affection humans experience. Due to their prevalence and health benefits, roboticists are naturally interested in having robots one day hug humans as seamlessly as humans hug other humans. This project's purpose is to evaluate human responses to different robot physical characteristics and hugging behaviors. Specifically, we aim to test the hypothesis that a soft, warm, touch-sensitive PR2 humanoid robot can provide humans with satisfying hugs by matching both their hugging pressure and their hugging duration. Thirty relatively young and rather technical participants experienced and evaluated twelve hugs with the robot, divided into three randomly ordered trials that focused on physical robot characteristics (single factor, three levels) and nine randomly ordered trials with low, medium, and high hug pressure and duration (two factors, three levels each). Analysis of the results showed that people significantly prefer soft, warm hugs over hard, cold hugs. Furthermore, users prefer hugs that physically squeeze them and release immediately when they are ready for the hug to end. Taking part in the experiment also significantly increased positive user opinions of robots and robot use.

hi

link (url) DOI Project Page [BibTex]

2018


link (url) DOI Project Page [BibTex]


no image
Complexity, Rate, and Scale in Sliding Friction Dynamics Between a Finger and Textured Surface

Khojasteh, B., Janko, M., Visell, Y.

Nature Scientific Reports, 8(13710), September 2018 (article)

Abstract
Sliding friction between the skin and a touched surface is highly complex, but lies at the heart of our ability to discriminate surface texture through touch. Prior research has elucidated neural mechanisms of tactile texture perception, but our understanding of the nonlinear dynamics of frictional sliding between the finger and textured surfaces, with which the neural signals that encode texture originate, is incomplete. To address this, we compared measurements from human fingertips sliding against textured counter surfaces with predictions of numerical simulations of a model finger that resembled a real finger, with similar geometry, tissue heterogeneity, hyperelasticity, and interfacial adhesion. Modeled and measured forces exhibited similar complex, nonlinear sliding friction dynamics, force fluctuations, and prominent regularities related to the surface geometry. We comparatively analysed measured and simulated forces patterns in matched conditions using linear and nonlinear methods, including recurrence analysis. The model had greatest predictive power for faster sliding and for surface textures with length scales greater than about one millimeter. This could be attributed to the the tendency of sliding at slower speeds, or on finer surfaces, to complexly engage fine features of skin or surface, such as fingerprints or surface asperities. The results elucidate the dynamical forces felt during tactile exploration and highlight the challenges involved in the biological perception of surface texture via touch.

hi

DOI [BibTex]

DOI [BibTex]


no image
Design of curved composite panels for optimal dynamic response using lamination parameters

Serhat, G., Basdogan, I.

Composites Part B: Engineering, 147, pages: 135–146, August 2018 (article)

Abstract
In this paper, dynamic response of composite panels is investigated using lamination parameters as design variables. Finite element analyses are performed to observe the individual and combined effects of different panel aspect ratios, curvatures and boundary conditions on the dynamic responses. Fundamental frequency contours for curved panels are obtained in lamination parameters domain and optimal points yielding maximum values are found. Subsequently, forced dynamic analyses are carried out to calculate equivalent radiated power (ERP) for the panels under harmonic pressure excitation. ERP contours at the maximum fundamental frequency are presented. Optimal lamination parameters providing minimum ERP are determined for different excitation frequencies and their effective frequency bands are shown. The relationship between the designs optimized for maximum fundamental frequency and minimum ERP responses is investigated to study the effectiveness of the frequency maximization technique. The results demonstrate the potential of using lamination parameters technique in the design of curved composite panels for optimal dynamic response and provide valuable insight on the effect of various design parameters.

hi

DOI [BibTex]

DOI [BibTex]


no image
A Robust Soft Lens for Tunable Camera Application Using Dielectric Elastomer Actuators

Nam, S., Yun, S., Yoon, J. W., Park, S., Park, S. K., Mun, S., Park, B., Kyung, K.

Soft robotics, Mary Ann Liebert, Inc., August 2018 (article)

Abstract
Developing tunable lenses, an expansion-based mechanism for dynamic focus adjustment can provide a larger focal length tuning range than a contraction-based mechanism. Here, we develop an expansion-tunable soft lens module using a disk-type dielectric elastomer actuator (DEA) that creates axially symmetric pulling forces on a soft lens. Adopted from a biological accommodation mechanism in human eyes, a soft lens at the annular center of a disk-type DEA pair is efficiently stretched to change the focal length in a highly reliable manner. A soft lens with a diameter of 3mm shows a 65.7% change in the focal length (14.3–23.7mm) under a dynamic driving voltage signal control. We confirm a quadratic relation between lens expansion and focal length that leads to large focal length tunability obtainable in the proposed approach. The fabricated tunable lens module can be used for soft, lightweight, and compact vision components in robots, drones, vehicles, and so on.

hi

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Task-Driven PCA-Based Design Optimization of Wearable Cutaneous Devices

Pacchierotti, C., Young, E. M., Kuchenbecker, K. J.

IEEE Robotics and Automation Letters, 3(3):2214-2221, July 2018, Presented at ICRA 2018 (article)

Abstract
Small size and low weight are critical requirements for wearable and portable haptic interfaces, making it essential to work toward the optimization of their sensing and actuation systems. This paper presents a new approach for task-driven design optimization of fingertip cutaneous haptic devices. Given one (or more) target tactile interactions to render and a cutaneous device to optimize, we evaluate the minimum number and best configuration of the device’s actuators to minimize the estimated haptic rendering error. First, we calculate the motion needed for the original cutaneous device to render the considered target interaction. Then, we run a principal component analysis (PCA) to search for possible couplings between the original motor inputs, looking also for the best way to reconfigure them. If some couplings exist, we can re-design our cutaneous device with fewer motors, optimally configured to render the target tactile sensation. The proposed approach is quite general and can be applied to different tactile sensors and cutaneous devices. We validated it using a BioTac tactile sensor and custom plate-based 3-DoF and 6-DoF fingertip cutaneous devices, considering six representative target tactile interactions. The algorithm was able to find couplings between each device’s motor inputs, proving it to be a viable approach to optimize the design of wearable and portable cutaneous devices. Finally, we present two examples of optimized designs for our 3-DoF fingertip cutaneous device.

hi

link (url) DOI [BibTex]

link (url) DOI [BibTex]


Teaching a Robot Bimanual Hand-Clapping Games via Wrist-Worn {IMU}s
Teaching a Robot Bimanual Hand-Clapping Games via Wrist-Worn IMUs

Fitter, N. T., Kuchenbecker, K. J.

Frontiers in Robotics and Artificial Intelligence, 5(85), July 2018 (article)

Abstract
Colleagues often shake hands in greeting, friends connect through high fives, and children around the world rejoice in hand-clapping games. As robots become more common in everyday human life, they will have the opportunity to join in these social-physical interactions, but few current robots are intended to touch people in friendly ways. This article describes how we enabled a Baxter Research Robot to both teach and learn bimanual hand-clapping games with a human partner. Our system monitors the user's motions via a pair of inertial measurement units (IMUs) worn on the wrists. We recorded a labeled library of 10 common hand-clapping movements from 10 participants; this dataset was used to train an SVM classifier to automatically identify hand-clapping motions from previously unseen participants with a test-set classification accuracy of 97.0%. Baxter uses these sensors and this classifier to quickly identify the motions of its human gameplay partner, so that it can join in hand-clapping games. This system was evaluated by N = 24 naïve users in an experiment that involved learning sequences of eight motions from Baxter, teaching Baxter eight-motion game patterns, and completing a free interaction period. The motion classification accuracy in this less structured setting was 85.9%, primarily due to unexpected variations in motion timing. The quantitative task performance results and qualitative participant survey responses showed that learning games from Baxter was significantly easier than teaching games to Baxter, and that the teaching role caused users to consider more teamwork aspects of the gameplay. Over the course of the experiment, people felt more understood by Baxter and became more willing to follow the example of the robot. Users felt uniformly safe interacting with Baxter, and they expressed positive opinions of Baxter and reported fun interacting with the robot. Taken together, the results indicate that this robot achieved credible social-physical interaction with humans and that its ability to both lead and follow systematically changed the human partner's experience.

hi

DOI [BibTex]

DOI [BibTex]


no image
Automatically Rating Trainee Skill at a Pediatric Laparoscopic Suturing Task

Oquendo, Y. A., Riddle, E. W., Hiller, D., Blinman, T. A., Kuchenbecker, K. J.

Surgical Endoscopy, 32(4):1840-1857, April 2018 (article)

hi

DOI [BibTex]

DOI [BibTex]


no image
Electroelastic modeling of thin-laminated composite plates with surface-bonded piezo-patches using Rayleigh–Ritz method

Gozum, M. M., Aghakhani, A., Serhat, G., Basdogan, I.

Journal of Intelligent Material Systems and Structures, 29(10):2192–2205, March 2018 (article)

Abstract
Laminated composite panels are extensively used in various engineering applications. Piezoelectric transducers can be integrated into such composite structures for a variety of vibration control and energy harvesting applications. Analyzing the structural dynamics of such electromechanical systems requires precise modeling tools which properly consider the coupling between the piezoelectric elements and the laminates. Although previous analytical models in the literature cover vibration analysis of laminated composite plates with fully covered piezoelectric layers, they do not provide a formulation for modeling the piezoelectric patches that partially cover the plate surface. In this study, a methodology for vibration analysis of laminated composite plates with surface-bonded piezo-patches is developed. Rayleigh–Ritz method is used for solving the modal analysis and obtaining the frequency response functions. The developed model includes mass and stiffness contribution of the piezo-patches as well as the two-way electromechanical coupling effect. Moreover, an accelerated method is developed for reducing the computation time of the modal analysis solution. For validations, system-level finite element simulations are performed in ANSYS software. The results show that the developed analytical model can be utilized for accurate and efficient analysis and design of laminated composite plates with surface-bonded piezo-patches.

hi pi

DOI [BibTex]

DOI [BibTex]


Electro-Active Polymer Based Soft Tactile Interface for Wearable Devices
Electro-Active Polymer Based Soft Tactile Interface for Wearable Devices

Mun, S., Yun, S., Nam, S., Park, S. K., Park, S., Park, B. J., Lim, J. M., Kyung, K. U.

IEEE Transactions on Haptics, 11(1):15-21, Febuary 2018 (article)

Abstract
This paper reports soft actuator based tactile stimulation interfaces applicable to wearable devices. The soft actuator is prepared by multi-layered accumulation of thin electro-active polymer (EAP) films. The multi-layered actuator is designed to produce electrically-induced convex protrusive deformation, which can be dynamically programmable for wide range of tactile stimuli. The maximum vertical protrusion is 650 μm and the output force is up to 255 mN. The soft actuators are embedded into the fingertip part of a glove and front part of a forearm band, respectively. We have conducted two kinds of experiments with 15 subjects. Perceived magnitudes of actuator's protrusion and vibrotactile intensity were measured with frequency of 1 Hz and 191 Hz, respectively. Analysis of the user tests shows participants perceive variation of protrusion height at the finger pad and modulation of vibration intensity through the proposed soft actuator based tactile interface.

hi

link (url) DOI [BibTex]

link (url) DOI [BibTex]


Robotic Motion Learning Framework to Promote Social Engagement
Robotic Motion Learning Framework to Promote Social Engagement

Burns, R., Jeon, M., Park, C. H.

Applied Sciences, 8(2):241, Febuary 2018, Special Issue "Social Robotics" (article)

Abstract
Imitation is a powerful component of communication between people, and it poses an important implication in improving the quality of interaction in the field of human–robot interaction (HRI). This paper discusses a novel framework designed to improve human–robot interaction through robotic imitation of a participant’s gestures. In our experiment, a humanoid robotic agent socializes with and plays games with a participant. For the experimental group, the robot additionally imitates one of the participant’s novel gestures during a play session. We hypothesize that the robot’s use of imitation will increase the participant’s openness towards engaging with the robot. Experimental results from a user study of 12 subjects show that post-imitation, experimental subjects displayed a more positive emotional state, had higher instances of mood contagion towards the robot, and interpreted the robot to have a higher level of autonomy than their control group counterparts did. These results point to an increased participant interest in engagement fueled by personalized imitation during interaction.

hi

link (url) DOI [BibTex]

link (url) DOI [BibTex]


{Direct observation of Zhang-Li torque expansion of magnetic droplet solitons}
Direct observation of Zhang-Li torque expansion of magnetic droplet solitons

Chung, S., Tuan Le, Q., Ahlberg, M., Awad, A. A., Weigand, M., Bykova, I., Khymyn, R., Dvornik, M., Mazraati, H., Houshang, A., Jiang, S., Nguyen, T. N. A., Goering, E., Schütz, G., Gräfe, J., \AAkerman, J.

{Physical Review Letters}, 120(21), American Physical Society, Woodbury, N.Y., 2018 (article)

Abstract
Magnetic droplets are nontopological dynamical solitons that can be nucleated in nanocontact based spin torque nano-oscillators (STNOs) with perpendicular magnetic anisotropy free layers. While theory predicts that the droplet should be of the same size as the nanocontact, its inherent drift instability has thwarted attempts at observing it directly using microscopy techniques. Here, we demonstrate highly stable magnetic droplets in all-perpendicular STNOs and present the first detailed droplet images using scanning transmission X-ray microscopy. In contrast to theoretical predictions, we find that the droplet diameter is about twice as large as the nanocontact. By extending the original droplet theory to properly account for the lateral current spread underneath the nanocontact, we show that the large discrepancy primarily arises from current-in-plane Zhang-Li torque adding an outward pressure on the droplet perimeter. Electrical measurements on droplets nucleated using a reversed current in the antiparallel state corroborate this picture.

mms

DOI [BibTex]

DOI [BibTex]


{Transmission x-ray microscopy at low temperatures: Irregular supercurrent flow at small length scales}
Transmission x-ray microscopy at low temperatures: Irregular supercurrent flow at small length scales

Simmendinger, J., Ruoss, S., Stahl, C., Weigand, M., Gräfe, J., Schütz, G., Albrecht, J.

{Physical Review B}, 97(13), American Physical Society, Woodbury, NY, 2018 (article)

Abstract
Scanning transmission x-ray microscopy has been used to image electric currents in superconducting films at temperatures down to 20 K. We detect significant deviations from a regular current path driven by macroscopic geometrical constraints. The magnetic stray field of supercurrents in a thin YBaCuO film is mapped into a soft-magnetic coating of permalloy. The so-created local magnetization of the ferromagnetic film can be detected by dichroic absorption of polarized x rays. To enable high-quality measurements in transmission geometry, the whole heterostructure of ferromagnet, superconductor, and single-crystalline substrate has been thinned to an overall thickness of less than 1 µm. With this technique, local supercurrents can be analyzed in a wide range of temperatures and magnetic fields. The less than 100 nm spatial resolution of the magnetic signal together with simultaneously obtained nanostructural data allow the correlation of local supercurrents with the micro- and nanostructure of the superconducting film.

mms

DOI [BibTex]

DOI [BibTex]


no image
Immersive Low-Cost Virtual Reality Treatment for Phantom Limb Pain: Evidence from Two Cases

Ambron, E., Miller, A., Kuchenbecker, K. J., Buxbaum, L. J., Coslett, H. B.

Frontiers in Neurology, 9(67):1-7, 2018 (article)

hi

DOI Project Page [BibTex]

DOI Project Page [BibTex]


no image
A physical model for efficient ranking in networks

De Bacco, C., Larremore, D. B., Moore, C.

Science Advances, 4(7), American Association for the Advancement of Science, 2018 (article)

pio

Code Preprint link (url) DOI Project Page [BibTex]

Code Preprint link (url) DOI Project Page [BibTex]


no image
Assessment methodology of promising porous materials for near ambient temperature hydrogen storage applications

Minuto, F. D., Balderas-Xicohténcatl, R., Policicchio, A., Hirscher, M., Agostino, R. G.

{International Journal of Hydrogen Energy}, 43(31):14550-14556, Elsevier, Amsterdam, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
AreWater Smart Landscapes’ Contagious? An epidemic approach on networks to study peer effects

Brelsford, C., De Bacco, C.

Networks and Spatial Economics (NETS), pages: 1572-9427, 2018 (article)

pio

Preprint link (url) [BibTex]

Preprint link (url) [BibTex]


no image
Incorporation of Terbium into a Microalga Leads to Magnetotactic Swimmers

Santomauro, G., Singh, A., Park, B. W., Mohammadrahimi, M., Erkoc, P., Goering, E., Schütz, G., Sitti, M., Bill, J.

Advanced Biosystems, 2(12):1800039, 2018 (article)

mms pi

[BibTex]

[BibTex]


no image
Thermodynamics, kinetics and selectivity of H2 and D2 on zeolite 5A below 77K

Xiong, R., Balderas-Xicohténcatl, R., Zhang, L., Li, P., Yao, Y., Sang, G., Chen, C., Tang, T., Luo, D., Hirscher, M.

{Microporous and Mesoporous Materials}, 264, pages: 22-27, Elsevier, Amsterdam, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Volumetric hydrogen storage capacity in metal-organic frameworks

Balderas-Xicohténcatl, R., Schlichtenmayer, M., Hirscher, M.

{Energy Technology}, 6(3):578-582, Wiley-VCH, Weinheim, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
3D nanoprinted plastic kinoform x-ray optics

Sanli, U. T., Ceylan, H., Bykova, I., Weigand, M., Sitti, M., Schütz, G., Keskinbora, K.

{Advanced Materials}, 30(36), Wiley-VCH, Weinheim, 2018 (article)

mms pi

DOI [BibTex]

DOI [BibTex]


no image
High volumetric hydrogen storage capacity using interpenetrated metal-organic frameworks

Balderas-Xicohténcatl, R., Schmieder, P., Denysenko, D., Volkmer, D., Hirscher, M.

{Energy Technology}, 6(3):510-512, Wiley-VCH, Weinheim, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


Tactile Masking by Electrovibration
Tactile Masking by Electrovibration

Vardar, Y., Güçlü, B., Basdogan, C.

IEEE Transactions on Haptics, 11(4):623-635, 2018 (article)

Abstract
Future touch screen applications will include multiple tactile stimuli displayed simultaneously or consecutively to single finger or multiple fingers. These applications should be designed by considering human tactile masking mechanism since it is known that presenting one stimulus may interfere with the perception of the other. In this study, we investigate the effect of masking on tactile perception of electrovibration displayed on touch screens. Through conducting psychophysical experiments with nine subjects, we measured the masked thresholds of sinusoidal electrovibration bursts (125 Hz) under two masking conditions: simultaneous and pedestal. The masking stimuli were noise bursts, applied at five different sensation levels varying from 2 to 22 dB SL, also presented by electrovibration. For each subject, the detection thresholds were elevated as linear functions of masking levels for both masking types. We observed that the masking effectiveness was larger with pedestal masking than simultaneous masking. Moreover, in order to investigate the effect of tactile masking on our haptic perception of edge sharpness, we compared the perceived sharpness of edges separating two textured regions displayed with and without various masking stimuli. Our results suggest that sharpness perception depends on the local contrast between background and foreground stimuli, which varies as a function of masking amplitude and activation levels of frequency-dependent psychophysical channels.

hi

vardar_toh2018 DOI [BibTex]

vardar_toh2018 DOI [BibTex]


no image
Geckos Race across Water using Multiple Mechanisms

Nirody, J., Jinn, J., Libby, T., Lee, T., Jusufi, A., Hu, D., Full, R.

Current Biology, 2018 (article)

bio

[BibTex]

[BibTex]


no image
Thick permalloy films for the imaging of spin texture dynamics in perpendicularly magnetized systems

Finizio, S., Wintz, S., Bracher, D., Kirk, E., Semisalova, A. S., Förster, J., Zeissler, K., We\ssels, T., Weigand, M., Lenz, K., Kleibert, A., Raabe, J.

{Physical Review B}, 98(10), American Physical Society, Woodbury, NY, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Dynamic Janus metasurfaces in the visible spectral region

Yu, P., Li, J., Zhang, S., Jin, Z., Schütz, G., Qiu, C., Hirscher, M., Liu, N.

{Nano Letters}, 18(7):4584-4589, American Chemical Society, Washington, DC, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Review of ultrafast demagnetization after femtosecond laser pulses: A complex interaction of light with quantum matter

Fähnle, M., Haag, M., Illg, C., Müller, B. Y., Weng, W., Tsatsoulis, T., Huang, H., Briones Paz, J. Z., Teeny, N., Zhang, L., Kuhn, T.

{American Journal of Modern Physics}, 7(2):68-74, Science Publishing Group, New York, NY, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Current-induced skyrmion generation through morphological thermal transitions in chiral ferromagnetic heterostructures

Lemesh, I., Litzius, K., Böttcher, M., Bassirian, P., Kerber, N., Heinze, D., Zázvorka, J., Büttner, F., Caretta, L., Mann, M., Weigand, M., Finizio, S., Raabe, J., Im, M., Stoll, H., Schütz, G., Dupé, B., Kläui, M., Beach, G. S. D.

{Advanced Materials}, 30(49), Wiley-VCH, Weinheim, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
3d nanofabrication of high-resolution multilayer Fresnel zone plates

Sanli, U. T., Jiao, C., Baluktsian, M., Grévent, C., Hahn, K., Wang, Y., Srot, V., Richter, G., Bykova, I., Weigand, M., Schütz, G., Keskinbora, K.

{Advanced Science}, 5(9), Wiley-VCH, Weinheim, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Photocatalytic CO2 reduction by Cr-substituted Ba2(In2-xCrx)O5\mbox⋅(H2O)δ(0.04 ≤x ≤0.60)

Yoon, S., Gaul, M., Sharma, S., Son, K., Hagemann, H., Ziegenbalg, D., Schwingenschlogl, U., Widenmeyer, M., Weidenkaff, A.

{Solid State Sciences}, 78, pages: 22-29, Elsevier Masson SAS, Paris, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Ferromagnetism in nitrogen and fluorine substituted BaTiO3

Yoon, S., Son, K., Ebbinghaus, S. G., Widenmeyer, M., Weidenkaff, A.

{Journal of Alloys and Compounds}, 749, pages: 628-633, Elsevier B.V., Lausanne, Switzerland, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Correction of axial position uncertainty and systematic detector errors in ptychographic diffraction imaging

Loetgering, L., Rose, M., Keskinbora, K., Baluktsian, M., Dogan, G., Sanli, U., Bykova, I., Weigand, M., Schütz, G., Wilhein, T.

{Optical Engineering}, 57(8), The Society, Redondo Beach, Calif., 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
The role of surface oxides on hydrogen sorption kinetics in titanium thin films

Hadjixenophontos, E., Michalek, L., Roussel, M., Hirscher, M., Schmitz, G.

{Applied Surface Science}, 441, pages: 324-330, Elsevier B.V., Amsterdam, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
New concepts for 3d optics in x-ray microscopy

Sanli, U., Ceylan, H., Jiao, C., Baluktsian, M., Grevent, C., Hahn, K., Wang, Y., Srot, V., Richter, G., Bykova, I., Weigand, M., Sitti, M., Schütz, G., Keskinbora, K.

{Microscopy and Microanalysis}, 24(Suppl 2):288-289, Cambridge University Press, New York, NY, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Spin-wave interference in magnetic vortex stacks

Behncke, C., Adolff, C. F., Lenzing, N., Hänze, M., Schulte, B., Weigand, M., Schütz, G., Meier, G.

{Communications Physics}, 1, Nature Publishing Group, London, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
High-throughput synthesis of modified Fresnel zone plate arrays via ion beam lithography

Keskinbora, K., Sanli, U. T., Baluktsian, M., Grévent, C., Weigand, M., Schütz, G.

{Beilstein Journal of Nanotechnology}, 9, pages: 2049-2056, Beilstein-Institut, Frankfurt am Main, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Deterministic creation and deletion of a single magnetic skyrmion observed by direct time-resolved X-ray microscopy

Woo, S., Song, K. M., Zhang, X., Ezawa, M., Zhou, Y., Liu, X., Weigand, M., Finizio, S., Raabe, J., Park, M.-C., Lee, K.-Y., Choi, J. W., Min, B.-C., Koo, H. C., Chang, J.

{Nature Electronics}, 1(5):288-296, Springer Nature, London, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Magnetic skyrmion as a nonlinear resistive element: A potential building block for reservoir computing

Prychynenko, D., Sitte, M., Litzius, K., Krüger, B., Bourianoff, G., Kläui, M., Sinova, J., Everschor-Sitte, K.

{Physical Review Applied}, 9(1), American Physical Society, College Park, Md. [u.a.], 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Tunable geometrical frustration in magnoic vortex crystals

Behncke, C., Adolff, C. F., Wintz, S., Hänze, M., Schulte, B., Weigand, M., Finizio, S., Raabe, J., Meier, G.

{Scientific Reports}, 8, Nature Publishing Group, London, UK, 2018 (article)

mms

DOI [BibTex]

DOI [BibTex]

2013


no image
A Practical System For Recording Instrument Interactions During Live Robotic Surgery

McMahan, W., Gomez, E. D., Chen, L., Bark, K., Nappo, J. C., Koch, E. I., Lee, D. I., Dumon, K., Williams, N., Kuchenbecker, K. J.

Journal of Robotic Surgery, 7(4):351-358, 2013 (article)

hi

[BibTex]

2013


[BibTex]


no image
Vibrotactile Display: Perception, Technology, and Applications

Choi, S., Kuchenbecker, K. J.

Proceedings of the IEEE, 101(9):2093-2104, sep 2013 (article)

hi

[BibTex]

[BibTex]


no image
ROS Open-source Audio Recognizer: ROAR Environmental Sound Detection Tools for Robot Programming

Romano, J. M., Brindza, J. P., Kuchenbecker, K. J.

Autonomous Robots, 34(3):207-215, April 2013 (article)

hi

[BibTex]

[BibTex]


no image
In Vivo Validation of a System for Haptic Feedback of Tool Vibrations in Robotic Surgery

Bark, K., McMahan, W., Remington, A., Gewirtz, J., Wedmid, A., Lee, D. I., Kuchenbecker, K. J.

Surgical Endoscopy, 27(2):656-664, February 2013, dynamic article (paper plus video), available at \href{http://www.springerlink.com/content/417j532708417342/}{http://www.springerlink.com/content/417j532708417342/} (article)

hi

[BibTex]

[BibTex]


no image
Perception of Springs with Visual and Proprioceptive Motion Cues: Implications for Prosthetics

Gurari, N., Kuchenbecker, K. J., Okamura, A. M.

IEEE Transactions on Human-Machine Systems, 43, pages: 102-114, January 2013, \href{http://www.youtube.com/watch?v=DBRw87Wk29E\&feature=youtu.be}{Video} (article)

hi

[BibTex]

[BibTex]


Magnetoelastic coupling in epitaxial cobalt ferrite/barium titanate heterostructures
Magnetoelastic coupling in epitaxial cobalt ferrite/barium titanate heterostructures

Gräfe, J., Welke, M., Bern, F., Ziese, M., Denecke, R.

Journal of Magnetism and Magnetic Materials, 339, pages: 84-88, 2013 (article)

Abstract
Ultra-thin cobalt ferrite films have been synthesised on ferroelectric barium titanate crystals. The cobalt ferrite films exhibit a magnetic response to strain induced by structural changes in the barium titanate substrate, suggesting a pathway to multiferroic coupling. These structural changes are achieved by heating through the phase transition temperatures of barium titanate. In addition the ferromagnetic signal of the substrate itself is taken into account, addressing the influence of impurities or defects in the substrate. The cobalt ferrite/barium titanate heterostructure is a suitable oxidic platform for future magnetoelectric applications with an established ferroelectric substrate and widely tuneable magnetic properties by changing the transition metal in the ferrite film.

mms

DOI [BibTex]

DOI [BibTex]


no image
Expectation and Attention in Hierarchical Auditory Prediction

Chennu, S., Noreika, V., Gueorguiev, D., Blenkmann, A., Kochen, S., Ibáñez, A., Owen, A. M., Bekinschtein, T. A.

Journal of Neuroscience, 33(27):11194-11205, Society for Neuroscience, 2013 (article)

Abstract
Hierarchical predictive coding suggests that attention in humans emerges from increased precision in probabilistic inference, whereas expectation biases attention in favor of contextually anticipated stimuli. We test these notions within auditory perception by independently manipulating top-down expectation and attentional precision alongside bottom-up stimulus predictability. Our findings support an integrative interpretation of commonly observed electrophysiological signatures of neurodynamics, namely mismatch negativity (MMN), P300, and contingent negative variation (CNV), as manifestations along successive levels of predictive complexity. Early first-level processing indexed by the MMN was sensitive to stimulus predictability: here, attentional precision enhanced early responses, but explicit top-down expectation diminished it. This pattern was in contrast to later, second-level processing indexed by the P300: although sensitive to the degree of predictability, responses at this level were contingent on attentional engagement and in fact sharpened by top-down expectation. At the highest level, the drift of the CNV was a fine-grained marker of top-down expectation itself. Source reconstruction of high-density EEG, supported by intracranial recordings, implicated temporal and frontal regions differentially active at early and late levels. The cortical generators of the CNV suggested that it might be involved in facilitating the consolidation of context-salient stimuli into conscious perception. These results provide convergent empirical support to promising recent accounts of attention and expectation in predictive coding.

hi

link (url) DOI [BibTex]

link (url) DOI [BibTex]


no image
Quantum cryo-sieving for hydrogen isotope separation in microporous frameworks: an experimental study on the correlation between effective quantum sieving and pore size

Oh, H., Park, K. S., Kalidindi, S. B., Fischer, R. A., Hirscher, M.

{Journal of Materials Chemistry A}, 1, pages: 3244-3248, Royal Society of Chemistry, Cambridge, UK, 2013 (article)

mms

DOI [BibTex]

DOI [BibTex]


{Switching modes in easy and hard axis magnetic reversal in a self-assembled antidot array}
Switching modes in easy and hard axis magnetic reversal in a self-assembled antidot array

Haering, F., Wiedwald, U., Nothelfer, S., Koslowski, B., Ziemann, P., Lechner, L., Wallucks, A., Lebecki, K., Nowak, U., Gräfe, J., Goering, E., Schütz, G.

{Nanotechnology}, 24, IOP Pub., Bristol, UK, 2013 (article)

Abstract
We study the reversal mechanisms in a self-assembled, hexagonally ordered Fe antidot array with a period of 200 nm and an antidot diameter of 100 nm which was prepared by polystyrene nanosphere lithography. Direction-dependent information in such a self-assembled sample is obtained by measuring the anisotropic magnetoresistance (AMR) through constrictions processed by focused ion beam milling in nearest neighbor and next nearest neighbor directions. We show that such an originally integral method can be used to investigate the strong in-plane anisotropy introduced by the antidot lattice. The easy and hard axis reversal mechanisms and corresponding AMR signals are modeled by micromagnetic simulations. Additional in-field magnetic force microscopy studies allow the correlation of microscopic switching to features in the integral AMR. We find that the easy axis of magnetization is connected to a distinct periodic magnetic domain pattern, which can be observed during the whole magnetization reversal. While this process is driven by nucleation and propagation of reversed domains, the hard axis reversal is characterized by a (stepwise) rotation of the magnetization via the antidot lattice' easy axes.

mms

DOI Project Page [BibTex]

DOI Project Page [BibTex]


no image
Gold nanocrystals in high-temperature superconducting films: creation of pinning patterns of choice

Katzer, C., Stahl, C., Michalowski, P., Treiber, S., Schmidl, F., Seidel, P., Albrecht, J., Schütz, G.

{New Journal of Physics}, 15(11), Institute of Physics Pub., Bristol, UK, 2013 (article)

mms

DOI [BibTex]

DOI [BibTex]


no image
Theory of scattering of crystal electrons at magnons

Haag, Michael, Illg, C., Fähnle, M.

{Physical Review B}, Published by the American Physical Society through the American Institute of Physics, Woodbury, NYAmerican Institute of Physics, Woodbury, NY, 2013 (article)

mms

DOI [BibTex]

DOI [BibTex]