Header logo is


2020


Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions
Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions

Lee, H., Tombak, G. I., Park, G., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
We introduce our recent study on the characterization of a commercial magnetic levitation haptic interface (MagLev 200, Butterfly Haptics LLC) for realistic high-bandwidth interactions. This device’s haptic rendering scheme can provide strong 6-DoF (force and torque) feedback without friction at all poses in its small workspace. The objective of our study is to enable the device to accurately render realistic multidimensional vibrotactile stimuli measured from a stylus-like tool. Our approach is to characterize the dynamics between the commanded wrench and the resulting translational acceleration across the frequency range of interest. To this end, we first custom-designed and attached a pen-shaped manipulandum (11.5 cm, aluminum) to the top of the MagLev 200’s end-effector for better usability in grasping. An accelerometer (ADXL354, Analog Devices) was rigidly mounted inside the manipulandum. Then, we collected a data set where the input is a 30-second-long force and/or torque signal commanded as a sweep function from 10 to 500 Hz; the output is the corresponding acceleration measurement, which we collected both with and without a user holding the handle. We succeeded at fitting both non-parametric and parametric versions of the transfer functions for both scenarios, with a fitting accuracy of about 95% for the parametric transfer functions. In the future, we plan to find the best method of applying the inverse parametric transfer function to our system. We will then employ that compensation method in a user study to evaluate the realism of different algorithms for reducing the dimensionality of tool-based vibrotactile cues.

hi

link (url) [BibTex]

2020


link (url) [BibTex]


Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location
Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location

Burns, R. B., Thomas, N., Lee, H., Faulkner, R., Kuchenbecker, K. J.

Hands-on demonstration presented at EuroHaptics, Leiden, The Netherlands, September 2020, Rachael Bevill Burns, Neha Thomas, and Hyosang Lee contributed equally to this publication (misc)

Abstract
Fabric-based tactile sensors are promising for the construction of robotic skin due to their soft and flexible nature. Conductive fabric layers can be used to form piezoresistive structures that are sensitive to contact force and/or contact location. This demonstration showcases three diverse fabric-based tactile sensors we have created. The first detects dynamic tactile events anywhere within a region on a robot’s body. The second design measures the precise location at which a single low-force contact is applied. The third sensor uses electrical resistance tomography to output both the force and location of multiple simultaneous contacts applied across a surface.

hi

Project Page Project Page [BibTex]

Project Page Project Page [BibTex]


no image
Estimating Human Handshape by Feeling the Wrist

Forte, M., Young, E. M., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Intermediate Ridges Amplify Mechanoreceptor Strains in Static and Dynamic Touch

Serhat, G., Kuchenbecker, K. J.

Work-in-progress poster presented at the EuroHaptics (EH), Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Seeing through Touch: Contact-Location Sensing and Tactile Feedback for Prosthetic Hands

Thomas, N., Kuchenbecker, K. J.

Works-in-progress abstract and poster presented at Eurohaptics 2020, Leiden, Netherlands, September 2020 (misc)

Abstract
Locating and picking up an object without vision is a simple task for able-bodied people, due in part to their rich tactile perception capabilities. The same cannot be said for users of standard myoelectric prostheses, who must rely largely on visual cues to successfully interact with the environment. To enable prosthesis users to locate and grasp objects without looking at them, we propose two changes: adding specialized contact-location sensing to the dorsal and palmar aspects of the prosthetic hand’s fingers, and providing the user with tactile feedback of where an object touches the fingers. To evaluate the potential utility of these changes, we developed a simple, sensitive, fabric-based tactile sensor which provides continuous contact location information via a change in voltage of a voltage divider circuit. This sensor was wrapped around the fingers of a commercial prosthetic hand (Ottobock SensorHand Speed). Using an ATI Nano17 force sensor, we characterized the tactile sensor’s response to normal force at distributed contact locations and obtained an average detection threshold of 0.63 +/- 0.26 N. We also confirmed that the voltage-to-location mapping is linear (R squared = 0.99). Sensor signals were adapted to the stationary vibrotactile funneling illusion to provide haptic feedback of contact location. These preliminary results indicate a promising system that imitates a key aspect of the sensory capabilities of the intact hand. Future work includes testing the system in a modified reach-grasp-and-lift study, in which participants must accomplish the task blindfolded.

hi

[BibTex]

[BibTex]


no image
Vision-based Force Estimation for a da Vinci Instrument Using Deep Neural Networks

Lee, Y., Husin, H. M., Forte, M., Lee, S., Kuchenbecker, K. J.

Extended abstract presented as an Emerging Technology ePoster at the Annual Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES), Cleveland, Ohio, USA, August 2020 (misc) Accepted

hi

[BibTex]

[BibTex]


Physical Variables Underlying Tactile Stickiness during Fingerpad Detachment
Physical Variables Underlying Tactile Stickiness during Fingerpad Detachment

Nam, S., Vardar, Y., Gueorguiev, D., Kuchenbecker, K. J.

Frontiers in Neuroscience, 14(235):1-14, April 2020 (article)

Abstract
One may notice a relatively wide range of tactile sensations even when touching the same hard, flat surface in similar ways. Little is known about the reasons for this variability, so we decided to investigate how the perceptual intensity of light stickiness relates to the physical interaction between the skin and the surface. We conducted a psychophysical experiment in which nine participants actively pressed their finger on a flat glass plate with a normal force close to 1.5 N and detached it after a few seconds. A custom-designed apparatus recorded the contact force vector and the finger contact area during each interaction as well as pre- and post-trial finger moisture. After detaching their finger, participants judged the stickiness of the glass using a nine-point scale. We explored how sixteen physical variables derived from the recorded data correlate with each other and with the stickiness judgments of each participant. These analyses indicate that stickiness perception mainly depends on the pre-detachment pressing duration, the time taken for the finger to detach, and the impulse in the normal direction after the normal force changes sign; finger-surface adhesion seems to build with pressing time, causing a larger normal impulse during detachment and thus a more intense stickiness sensation. We additionally found a strong between-subjects correlation between maximum real contact area and peak pull-off force, as well as between finger moisture and impulse.

hi

link (url) DOI Project Page [BibTex]


A Fabric-Based Sensing System for Recognizing Social Touch
A Fabric-Based Sensing System for Recognizing Social Touch

Burns, R. B., Lee, H., Seifi, H., Kuchenbecker, K. J.

Work-in-progress paper (3 pages) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

Abstract
We present a fabric-based piezoresistive tactile sensor system designed to detect social touch gestures on a robot. The unique sensor design utilizes three layers of low-conductivity fabric sewn together on alternating edges to form an accordion pattern and secured between two outer high-conductivity layers. This five-layer design demonstrates a greater resistance range and better low-force sensitivity than previous designs that use one layer of low-conductivity fabric with or without a plastic mesh layer. An individual sensor from our system can presently identify six different communication gestures – squeezing, patting, scratching, poking, hand resting without movement, and no touch – with an average accuracy of 90%. A layer of foam can be added beneath the sensor to make a rigid robot more appealing for humans to touch without inhibiting the system’s ability to register social touch gestures.

hi

Project Page [BibTex]

Project Page [BibTex]


Do Touch Gestures Affect How Electrovibration Feels?
Do Touch Gestures Affect How Electrovibration Feels?

Vardar, Y., Kuchenbecker, K. J.

Hands-on demonstration (1 page) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

hi

[BibTex]

[BibTex]


Learning to Predict Perceptual Distributions of Haptic Adjectives
Learning to Predict Perceptual Distributions of Haptic Adjectives

Richardson, B. A., Kuchenbecker, K. J.

Frontiers in Neurorobotics, 13(116):1-16, Febuary 2020 (article)

Abstract
When humans touch an object with their fingertips, they can immediately describe its tactile properties using haptic adjectives, such as hardness and roughness; however, human perception is subjective and noisy, with significant variation across individuals and interactions. Recent research has worked to provide robots with similar haptic intelligence but was focused on identifying binary haptic adjectives, ignoring both attribute intensity and perceptual variability. Combining ordinal haptic adjective labels gathered from human subjects for a set of 60 objects with features automatically extracted from raw multi-modal tactile data collected by a robot repeatedly touching the same objects, we designed a machine-learning method that incorporates partial knowledge of the distribution of object labels into training; then, from a single interaction, it predicts a probability distribution over the set of ordinal labels. In addition to analyzing the collected labels (10 basic haptic adjectives) and demonstrating the quality of our method's predictions, we hold out specific features to determine the influence of individual sensor modalities on the predictive performance for each adjective. Our results demonstrate the feasibility of modeling both the intensity and the variation of haptic perception, two crucial yet previously neglected components of human haptic perception.

hi

DOI Project Page [BibTex]


no image
Exercising with Baxter: Preliminary Support for Assistive Social-Physical Human-Robot Interaction

Fitter, N. T., Mohan, M., Kuchenbecker, K. J., Johnson, M. J.

Journal of NeuroEngineering and Rehabilitation, 17(19), Febuary 2020 (article)

Abstract
Background: The worldwide population of older adults will soon exceed the capacity of assisted living facilities. Accordingly, we aim to understand whether appropriately designed robots could help older adults stay active at home. Methods: Building on related literature as well as guidance from experts in game design, rehabilitation, and physical and occupational therapy, we developed eight human-robot exercise games for the Baxter Research Robot, six of which involve physical human-robot contact. After extensive iteration, these games were tested in an exploratory user study including 20 younger adult and 20 older adult users. Results: Only socially and physically interactive games fell in the highest ranges for pleasantness, enjoyment, engagement, cognitive challenge, and energy level. Our games successfully spanned three different physical, cognitive, and temporal challenge levels. User trust and confidence in Baxter increased significantly between pre- and post-study assessments. Older adults experienced higher exercise, energy, and engagement levels than younger adults, and women rated the robot more highly than men on several survey questions. Conclusions: The results indicate that social-physical exercise with a robot is more pleasant, enjoyable, engaging, cognitively challenging, and energetic than similar interactions that lack physical touch. In addition to this main finding, researchers working in similar areas can build on our design practices, our open-source resources, and the age-group and gender differences that we found.

hi

DOI Project Page [BibTex]

DOI Project Page [BibTex]