Header logo is


2020


Utilizing Interviews and Thematic Analysis to Uncover Specifications for a Companion Robot
Utilizing Interviews and Thematic Analysis to Uncover Specifications for a Companion Robot

Burns, R. B., Seifi, H., Lee, H., Kuchenbecker, K. J.

Workshop paper (2 pages) presented at the ICSR Workshop on Enriching HRI Research with Qualitative Methods, Virtual, November 2020 (misc)

Abstract
We will share our experiences designing and conducting structured video-conferencing interviews with autism specialists and utilizing thematic analysis to create qualitative requirements and quantitative specifications for a touch-perceiving robot companion tailored for children with autism. We will also explain how we wrote about our qualitative approaches for a journal setting.

hi

link (url) [BibTex]

2020


link (url) [BibTex]


Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions
Characterization of a Magnetic Levitation Haptic Interface for Realistic Tool-Based Interactions

Lee, H., Tombak, G. I., Park, G., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
We introduce our recent study on the characterization of a commercial magnetic levitation haptic interface (MagLev 200, Butterfly Haptics LLC) for realistic high-bandwidth interactions. This device’s haptic rendering scheme can provide strong 6-DoF (force and torque) feedback without friction at all poses in its small workspace. The objective of our study is to enable the device to accurately render realistic multidimensional vibrotactile stimuli measured from a stylus-like tool. Our approach is to characterize the dynamics between the commanded wrench and the resulting translational acceleration across the frequency range of interest. To this end, we first custom-designed and attached a pen-shaped manipulandum (11.5 cm, aluminum) to the top of the MagLev 200’s end-effector for better usability in grasping. An accelerometer (ADXL354, Analog Devices) was rigidly mounted inside the manipulandum. Then, we collected a data set where the input is a 30-second-long force and/or torque signal commanded as a sweep function from 10 to 500 Hz; the output is the corresponding acceleration measurement, which we collected both with and without a user holding the handle. We succeeded at fitting both non-parametric and parametric versions of the transfer functions for both scenarios, with a fitting accuracy of about 95% for the parametric transfer functions. In the future, we plan to find the best method of applying the inverse parametric transfer function to our system. We will then employ that compensation method in a user study to evaluate the realism of different algorithms for reducing the dimensionality of tool-based vibrotactile cues.

hi

link (url) [BibTex]

link (url) [BibTex]


Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location
Tactile Textiles: An Assortment of Fabric-Based Tactile Sensors for Contact Force and Contact Location

Burns, R. B., Thomas, N., Lee, H., Faulkner, R., Kuchenbecker, K. J.

Hands-on demonstration presented at EuroHaptics, Leiden, The Netherlands, September 2020, Rachael Bevill Burns, Neha Thomas, and Hyosang Lee contributed equally to this publication (misc)

Abstract
Fabric-based tactile sensors are promising for the construction of robotic skin due to their soft and flexible nature. Conductive fabric layers can be used to form piezoresistive structures that are sensitive to contact force and/or contact location. This demonstration showcases three diverse fabric-based tactile sensors we have created. The first detects dynamic tactile events anywhere within a region on a robot’s body. The second design measures the precise location at which a single low-force contact is applied. The third sensor uses electrical resistance tomography to output both the force and location of multiple simultaneous contacts applied across a surface.

hi

Project Page Project Page [BibTex]

Project Page Project Page [BibTex]


no image
Estimating Human Handshape by Feeling the Wrist

Forte, M., Young, E. M., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


Sweat Softens the Outermost Layer of the Human Finger Pad: Evidence from Simulations and Experiments
Sweat Softens the Outermost Layer of the Human Finger Pad: Evidence from Simulations and Experiments

Nam, S., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020, Award for best poster in 2020 (misc)

hi

Project Page [BibTex]

Project Page [BibTex]


no image
Intermediate Ridges Amplify Mechanoreceptor Strains in Static and Dynamic Touch

Serhat, G., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Seeing Through Touch: Contact-Location Sensing and Tactile Feedback for Prosthetic Hands

Thomas, N., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
Locating and picking up an object without vision is a simple task for able-bodied people, due in part to their rich tactile perception capabilities. The same cannot be said for users of standard myoelectric prostheses, who must rely largely on visual cues to successfully interact with the environment. To enable prosthesis users to locate and grasp objects without looking at them, we propose two changes: adding specialized contact-location sensing to the dorsal and palmar aspects of the prosthetic hand’s fingers, and providing the user with tactile feedback of where an object touches the fingers. To evaluate the potential utility of these changes, we developed a simple, sensitive, fabric-based tactile sensor which provides continuous contact location information via a change in voltage of a voltage divider circuit. This sensor was wrapped around the fingers of a commercial prosthetic hand (Ottobock SensorHand Speed). Using an ATI Nano17 force sensor, we characterized the tactile sensor’s response to normal force at distributed contact locations and obtained an average detection threshold of 0.63 +/- 0.26 N. We also confirmed that the voltage-to-location mapping is linear (R squared = 0.99). Sensor signals were adapted to the stationary vibrotactile funneling illusion to provide haptic feedback of contact location. These preliminary results indicate a promising system that imitates a key aspect of the sensory capabilities of the intact hand. Future work includes testing the system in a modified reach-grasp-and-lift study, in which participants must accomplish the task blindfolded.

hi

[BibTex]

[BibTex]


Do Touch Gestures Affect How Electrovibration Feels?
Do Touch Gestures Affect How Electrovibration Feels?

Vardar, Y., Javot, B., Kuchenbecker, K. J.

Hands-on demonstration presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

Abstract
Our interactions with current electronic devices involve different finger gestures such as tapping, sliding, and pinching. Hence, when electrovibration technology is used for generating tactile feedback on these devices, the interaction of the user will not be limited to only one sliding finger. Does the perception of an electrovibration stimulus depend on the gesture being used? This demonstration lets attendees answer this question for themselves by interacting with an electrostatic display using four representative gestures: one finger stationary, one finger sliding, two fingers sliding, and one finger stationary and another finger sliding.

hi

[BibTex]

[BibTex]


no image
Haptify: a Comprehensive Benchmarking System for Grounded Force-Feedback Haptic Devices

Fazlollahi, F., Kuchenbecker, K. J.

Work-in-progress poster presented at EuroHaptics, Leiden, The Netherlands, September 2020 (misc)

hi

[BibTex]

[BibTex]


no image
Vision-based Force Estimation for a da Vinci Instrument Using Deep Neural Networks

Lee, Y., Husin, H. M., Forte, M., Lee, S., Kuchenbecker, K. J.

Extended abstract presented as an Emerging Technology ePoster at the Annual Meeting of the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES), Cleveland, Ohio, USA, August 2020 (misc) Accepted

hi

[BibTex]

[BibTex]


FootTile: a Rugged Foot Sensor for Force and Center of Pressure Sensing in Soft Terrain
FootTile: a Rugged Foot Sensor for Force and Center of Pressure Sensing in Soft Terrain

Felix Ruppert, , Badri-Spröwitz, A.

In Proceedings of the IEEE International Conference on Robotics and Automation, IEEE, International Conference on Robotics and Automation, May 2020 (inproceedings) Accepted

Abstract
In this paper, we present FootTile, a foot sensor for reaction force and center of pressure sensing in challenging terrain. We compare our sensor design to standard biomechanical devices, force plates and pressure plates. We show that FootTile can accurately estimate force and pressure distribution during legged locomotion. FootTile weighs 0.9g, has a sampling rate of 330 Hz, a footprint of 10×10 mm and can easily be adapted in sensor range to the required load case. In three experiments, we validate: first, the performance of the individual sensor, second an array of FootTiles for center of pressure sensing and third the ground reaction force estimation during locomotion in granular substrate. We then go on to show the accurate sensing capabilities of the waterproof sensor in liquid mud, as a showcase for real world rough terrain use.

dlg

Youtube1 Youtube2 Presentation link (url) [BibTex]

Youtube1 Youtube2 Presentation link (url) [BibTex]


Changes in Normal Force During Passive Dynamic Touch: Contact Mechanics and Perception
Changes in Normal Force During Passive Dynamic Touch: Contact Mechanics and Perception

Gueorguiev, D., Lambert, J., Thonnard, J., Kuchenbecker, K. J.

In Proceedings of the IEEE Haptics Symposium (HAPTICS), pages: 746-752, Washington, USA, March 2020 (inproceedings)

Abstract
Using a force-controlled robotic platform, we investigated the contact mechanics and psychophysical responses induced by negative and positive modulations in normal force during passive dynamic touch. In the natural state of the finger, the applied normal force modulation induces a correlated change in the tangential force. In a second condition, we applied talcum powder to the fingerpad, which induced a significant modification in the slope of the correlated tangential change. In both conditions, the same ten participants had to detect the interval that contained a decrease or an increase in the pre-stimulation normal force of 1 N. In the natural state, the 75% just noticeable difference for this task was found to be a ratio of 0.19 and 0.18 for decreases and increases, respectively. With talcum powder on the fingerpad, the normal force thresholds remained stable, following the Weber law of constant just noticeable differences, while the tangential force thresholds changed in the same way as the correlation slopes. This result suggests that participants predominantly relied on the normal force changes to perform the detection task. In addition, participants were asked to report whether the force decreased or increased. Their performance was generally poor at this second task even for above-threshold changes. However, their accuracy slightly improved with the talcum powder, which might be due to the reduced finger-surface friction.

hi

DOI [BibTex]

DOI [BibTex]


A Fabric-Based Sensing System for Recognizing Social Touch
A Fabric-Based Sensing System for Recognizing Social Touch

Burns, R. B., Lee, H., Seifi, H., Kuchenbecker, K. J.

Work-in-progress paper (3 pages) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

Abstract
We present a fabric-based piezoresistive tactile sensor system designed to detect social touch gestures on a robot. The unique sensor design utilizes three layers of low-conductivity fabric sewn together on alternating edges to form an accordion pattern and secured between two outer high-conductivity layers. This five-layer design demonstrates a greater resistance range and better low-force sensitivity than previous designs that use one layer of low-conductivity fabric with or without a plastic mesh layer. An individual sensor from our system can presently identify six different communication gestures – squeezing, patting, scratching, poking, hand resting without movement, and no touch – with an average accuracy of 90%. A layer of foam can be added beneath the sensor to make a rigid robot more appealing for humans to touch without inhibiting the system’s ability to register social touch gestures.

hi

Project Page [BibTex]

Project Page [BibTex]


Do Touch Gestures Affect How Electrovibration Feels?
Do Touch Gestures Affect How Electrovibration Feels?

Vardar, Y., Kuchenbecker, K. J.

Hands-on demonstration (1 page) presented at the IEEE Haptics Symposium, Washington, DC, USA, March 2020 (misc)

hi

[BibTex]

[BibTex]


Electronics, Software and Analysis of a Bioinspired Sensorized Quadrupedal Robot
Electronics, Software and Analysis of a Bioinspired Sensorized Quadrupedal Robot

Petereit, R.

Technische Universität München, 2020 (mastersthesis)

dlg

[BibTex]